Laboratory Furniture Fume Hood plan design and supply - Cartmay Industrial

Single Bowl Portable Hand Sink Cart (Hot / Cold Water)

Product Overview

Stainless steel construction

Lockable Access door

220 Volt water heater (5 liter,1750w)

Fully assembled & crated

220 volt water pump (30w, Protection pressure: 0.4Mpa)

25 liter removable fresh water tank

30 liter removable waste water tank

380mm W x 340mm D x 140mm H SS sink

Backsplash for soap & towel dispensers

1.8 meter cord with standard wall plug

Safety precautions

The water heater and water pump use 220V power supply and must be connected with a high-quality socket, which must be reliably grounded.

Do not connect the power supply before the water tank of the water heater is full of water to avoid malfunction of the equipment.

Water above 50℃ Celsius may cause scalding, so please make sure to adjust the water temperature to the appropriate level before using it with your family, especially children.

When there is enough hot water, try to lower the set temperature. This can reduce heat dissipation while also reducing high-temperature corrosion and scaling, thus extending the life of the water heater.

During the heating and insulation process, the displayed temperature fluctuates due to the residual heat and temperature rise, which is normal.

If the water pump starts and stops frequently (the water pump makes a "tick-tick" sound), please stop using it immediately.

If the water pump and water heater are not used for a long time, please disconnect the power supply.

When connected to a pressurized water source, the water pressure at the water inlet shall not be greater than the pump protection pressure.